The connecting MLT Mini Record MR2 lock for tapes up to 5 mm thick
- 2535.65 UAH/lm - from 10 lm
- Customer pickup,
- In detail
MLT Mini Record MR2 locks for connection of conveyor tapes - analog of Flexco Alligator Ready Set or just Alligator are widely known thanks to the universality and simplicity of installation, are used for mechanical joining of conveyer and technological belts in a wide range of branches.
|Connection standard size||Durability of a tape, N/mm||Thickness of a tape, mm||Min diameter of a drum, mm|
The connecting MLT Mini Record MR2 lock is used on the conveyor equipment in the food industry, in woodworking branch, in airport farms in systems of transportation of baggage, on warehouse and post conveyors, in the agricultural equipment, in chemical branches, in conveyor systems of general purpose and allow to make connection of any types of polymeric conveyor tapes from PVC and polyurethane and rezinotkanevy tapes.
The system of skobovy fastening MLT Mini Record MR is intended for connection conveyor by a lenttolshchina from 1,5 to 6,4 mm, with the minimum diameters of rounding of shaft and drums from 50 to 100 mm, at the durability of tape from 300 N/mm up to 400 N/mm.
Are metal strips of skobovy fastenings with already built in brackets that allows to reduce time of joining of a conveyor tape considerably.
Principle of work and installation of the MLT Mini Record MR connection: the brackets which are built in in plates of the lock get into the conveyer belt between framework fibers, avoiding damage of a cord of a conveyor tape, by means of the hammer the acting part of brackets breaks through the joined tape and and zaklepyvatsya crosswisely that does not allow to rasklepyvatsya further to connection at a tension and work of a conveyor tape.
After installation installation of the hinged MLT Mini Record MR connection on each party of the conveyer belt, the tape with already fixed parts of the lock is put on the conveyor, stretches and each part connects a special connecting core.
The acting parts of a core if necessary are clamped by the washers which are available in a set though in general, at a tape tension the cable is rather strongly fixed in a joint and the risk of a vyskakivaniye of a cable from connection does not arise.
Advantages of butt MLT Mini Record MR hinges: simplicity of installation, speed of installation, lack of an additional expense of a conveyor tape, at least the tool, necessary for fixing, besides in case of a joint of a tape of small length, it is possible to fix a connector and without special equipment by means of the ordinary hammer. The face part of the connecting MLT Mini Record MR hinge has slanted edges that excludes hooks of the transported products and provides so-called smoothness of a surface of a tape.
For installation of MLT Mini Record MR locks it is offered to use the special replacement tool