UAH
Mechanical connectors of k28 for connection of a conveyor tape 1000 mm wide in Kiev online-store Konvejer Servis, OOO | Buy Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide Kiev (Ukraine) | Konvejer Servis, OOO : Allbiz
Premium Standard
Reviews: 2

Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide

Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide
  • Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide
  • Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide
  • Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide
  • Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide
  • Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide
  • Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide
  • Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide
In stock
Price:
1350 UAH
Brand:ЦЕНТРОБЕЛТ
Country of manufacture:Ukraine
Shipping:
Description

Mechanical connectors of K27 K28. The K20 system for joining of conveyer belts with the durability up to 1000 N/mm. Brackets with an anticorrosive zinc covering the K28 K27 type

As the alternative of hot and cold curing, mechanical joining of conveyor tapes demountable connectors of the K20 system the K27 K28 type wins the increasing popularity. Such technology of connection of conveyer belts allows to perform works much quicker and cheaper:

  • time of installation of only 30-40 minutes directly on the conveyor
  • the economy of the conveyer belt - K27 K28 is a butt connection a joint - in - a joint
  • simple and not expensive equipment - universally assembly ustroysto is used by SKL20
  • joining of tapes by own efforts, without hired experts
  • the cost of a joint is from 40 c.u. depending on width of the conveyer belt

The K27, K28 type is design feature of mechanical connectors of the K20 series a way of connection of the mechanical hinge with the conveyer belt - by means of the chetyrekhzhalny steel wire brackets of small diameter connected among themselves in strips 200 mm long by means of wire crossing points. Such design provides the sparing influence on a cord of the conveyer belt and, as a result, the increased dynamic durability of butt connection and the minimum impact of a joint on lining of a barabanaa conveyor design elements.

Connectors of the centrobelt K20 series are issued two types:

Wire brackets with a corrosion-resistant zinc coating the K27 Type for tapes 8-11 mm thick

Wire brackets with a corrosion-resistant zinc coating the K28 Type for tapes 10-13 mm thick

Connectors of K27, K28 are pressed in the ends of the joined tapes by means of the special lever device then both parts of a joint connect by the principle of "lock lightning", i.e. brackets of one end of a tape are located between brackets of another, and in loops the connecting core of K20 is entered.

The connecting core of K20 for K27, K28 represents a piece of a special rope with special seal of the ends which length depends on width of the joined conveyer belt.

Important! a connecting core of K20 - very important element of butt connection. Durability and a design of original connecting cores of centrobelt provides the best operational indicators.

Length of a connecting core of K20, mm - 785, 985, 1185, 1385, 1585.

Connectors of K27, K28 of centrobelt are delivered in sets with a connecting core of K20 on width of the joined tape 800 mm, 1000 mm, 1200 mm, 1400, 1600 mm - but, thanks to a section structure, when joining a tape connectors can be gathered on any width of a tape.

Length of a connecting core of K20, mm - 785, 985, 1185, 1385, 1585

Brackets of K27 K28 are delivered in a set on width of the joined tape by cartridges on 200 mm, in this regard when joining a tape connectors can be gathered on any width of a tape.

Advantages of connectors of the K20 series. K27, K28 type

- by preparation for joining of a tape the technology becomes simpler, tape facings, simple cutting of a tape at right angle by means of a square do not exfoliate;

- flexibility of the received joint same, as integral tape that does not create tension when passing by a tape of drums;

- the tape, identical on all thickness, will not complicate passing on clearing devices;

- dismantle and installation of a tape cloth in any place becomes simpler;

- the share of manual skills (mechanization of works) in connection with use of the tool decreases.

Advantages of brackets of K27 K28 of centrobelt before other types of butt connections:

  • On one joint of K27 K28 the economy makes tape about a meter. Considering this fact, the demountable butt K27 K28 connections stand, approximately, as square meter of a common industrial conveyor tape - joining turns out, it is possible to consider, conditionally free!
  • The stitching of conveyer belts demountable connectors of K27 K28 can be made even in the dusty room or on a frost
  • The received demountable joint of K27 K28 facilitates removal of a tape from the conveyor.
  • It is very convenient to use systems of the K27 K28 connection during the driving works and on conveyors with a changeable length
  • Hinged connectors of K27 K28 do not make negative impact on rollers, lining of reels and clearing devices
  • The conveyor is ready to start right after joining of a tape. Idle time duration, in comparison with joining "with an overlap", decreases at several o'clock and makes only 30-40 minutes.

One set of connectors of K27 K28 of centrobelt provides a bilateral insertion of the conveyer belt corresponding shiriny:k28-800 to mm, K28-1000 of mm, K28-1200 of mm, K28-1400 of mm and, respectively: K27-800 of mm, K27-1000 of mm, K27-1200 of mm, mm K27-1400

The special connecting core of K20 on the specified width of the conveyer belt is included in the packages of centrobelt.

Demountable connectors of K27 K28 of centrobelt can be gathered on ANY WIDTH of the CONVEYER BELT as it is less than 800 mm and more than 1400 mm. You should order separately necessary length of a connecting core of K20

The assembly SKL20 U device for a press fitting of connectors of K27 K28

The universal SKL20 device allows to install demountable connectors of K27 K28 on the conveyer belt of any width.

The weight of the SKL 20 device of only 35 kg therefore it is easy and convenient to transport it for joining of conveyer belts directly on the conveyor.

Detailed description of mechanical connectors of K27 K28

Demountable mechanical connectors of K28 for joining of conveyer belts from 10 to 13 mm thick

Are intended for joining of conveyer belts with the durability up to 1000 N/mm

The K27, K28 type is design feature of mechanical connectors of the K20 series a way of connection of the mechanical hinge with the conveyer belt - by means of the chetyrekhzhalny steel wire brackets of small diameter connected among themselves in strips 200 mm long by means of wire crossing points. Such design provides the sparing influence on a cord of the conveyer belt and, as a result, the increased dynamic durability of butt connection and the minimum impact of a joint on lining of a drum and elements of a design of the conveyor.

Wire brackets are made of a special steel wire with an anticorrosive covering.

Connectors of the K20 series are issued two types:

K27 for tapes 7-11 mm thick

K28 for tapes 10-13 mm thick

Connectors of K28 are pressed in the ends of the joined tapes by means of the special lever device then both parts of a joint connect by the principle of "lock lightning", i.e. brackets of one end of a tape are located between brackets of another, and in loops the connecting core of K20 is entered.

The connecting core of K20 for K28 represents a piece of a rope of a special design with special seal of the ends which length depends on width of the joined conveyer belt.

Length of a connecting core of K20, mm - 785, 985, 1185, 1385, 1585.

Connectors of K27, K28 are delivered in a set on width of the joined tape 1200 mm - 12 strips on 200 mm, in this regard when joining a tape connectors can be gathered on any width of a tape.

Advantages of connectors of the K20 series. K27, K28 type

– by preparation for joining of a tape the technology becomes simpler, tape facings, simple cutting of a tape at right angle by means of a square do not exfoliate;

– flexibility of the received joint same, as integral tape that does not create tension when passing by a tape of drums;

– the tape, identical on all thickness, will not complicate passing on clearing devices;

– dismantle and installation of a tape cloth in any place becomes simpler;

– the share of manual skills (mechanization of works) in connection with use of the tool decreases.

 

Characteristics:
Brand:ЦЕНТРОБЕЛТ
Country of manufacture:Ukraine
Information is up-to-date: 11.12.2019
Shipping method

Read more

Unbelievable price on Mechanical connectors of K28 for connection of a conveyor tape 1000 mm wide in Kiev (Ukraine) company Konvejer Servis, OOO.
LiveInternet