Mechanical butt connection for conveyer belts Vulcan Krug of 100 pieces.
- 1926 UAH/pcs - from 5 pcs
- Customer pickup,
- In detail
Mechanical connectors Vulcan Krug
Mechanical butt connection Vulcan Krug has the round pro-thinned-out form of clamping plates with perforation elements. The element of butt connection Vulcan Krug consists of two clamping punched plates with through openings and the connecting screw. In the lower punched clamping plate the nut is pressed.
The principle of work of mechanical connection Vulcan Krug consists in ensuring settlement effort of squeezing with screws of a tape cloth in a junction by means of the top and lower clamping punched elements established in a certain order influencing the connected ends of a tape cloth with step cutting, excluding cloth prosechka between the clamping area of connectors in one plane.
At the expense of the concave design Vulcan Krug, at an inhaling and immersion of elements of connection in a body of a tape cloth, allows to distribute evenly under himself a rubber facing. Perforation elements on clamping plates provide an exit of excess rubber from openings, thereby allowing to ship connection elements in a facing of a tape cloth as much as possible. Rounded shape of the lower part of edges prevents effect of pro-cutting of a facing.
Mechanical connection Vulcan Krug allows to reduce effect of crush and deformation of a tape cloth, and also gives the chance of use of connection for joining of "thin" tape cloths from 7 mm thick.
Having the pro-thinned-out form and additional stiffening ribs butt connection Vulcan Krug allows to prevent effect of a flexure and diagonal deformation of washers, at an inhaling not less than 150 Nanometers.
The rounded forms of a washer and lack of corners on them allows, at wear of a tape cloth to provide smooth passing of elements of the conveyor, such as: cleaners, rollers, drums, including futerovanny.
Mechanical connection Vulcan Krug allowed to increase strength characteristics of joints of conveyer belts and is an effective way of joining of cloths with explosive effort to 2500 kN/m on conveyors with a tilt angle to 18 °.
Four-row joint Vulcan Krug 100/1250
For the low-loaded and short tape conveyors during the driving and other works. A set of connectors Vulcan Krug 100/1250 intended for joining of a tape cloth with the durability up to 1250 kN/m on conveyors with a tilt angle to 10 degrees which are not used for transportation of people.
|- the washer is top||- 100 pieces.|
|- a washer lower with a nut||- 100 pieces.|
|- M6*50 screw||- 100 pieces.|
|- TORX 30 bat||- 1 pieces.|
IMPORTANT! The maximum durability of butt connection, is reached on condition of its tightening with the moment not less than 150 N/m. At connection of a cloth according to any scheme in the place of joining always on 2 fabric layers it is more, than at the connected cloth.